hi, i'm new overthere and after few search in you forum and on the net i cannot find any information about the astroflex 3106 U.
i try to find where to hock up my alarm LED.
basicly, i bought a car and the guys before me have done a pretty bad instalation, so i've got to do it again.
i fix every thing , except the damn LED.
i doesen'T have the particular wiring diagram for the 3106 U , but on from serie 500-1100-2100-4100.
so is somebody can help me out how to figure my LED !
ps: where i can find a nice one ? like a blue or something , is they are available at The source ? something easy to instal.
thank guys !
The older astro LEDs sucked. Very dim. I have tried to replace the LED with a DEI, and a Compustar blue. Still very dim.
The led plugs into the P-9 plug under the flapper. it's the smallest plug On the back of the unit it will show you.
Let me know!
-------------
so basicly, you ground the LED somewhere and plug the power wire on P-9 ??
oh, on the 3106 U you get the conector P2 with 16 wires , P3 with 6 conectors , p4 with 7 conector , p5 with 3 and the accesorie plug in with P1- to P16
can you explain it a bit more please (i'm french so i mabey don'T understand every thing ;)
what that mean : The led plugs into the P-9 plug under the flapper. it's the smallest plug On the back of the unit it will show you.
thank you very mutch !
PM me your email address I can send you the install manual (if you don't have it) and it will be in French as well.
The P9 is a direct plug for the LED. Just plug it in.
-------------