starter kill wired correctly?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102853
Printed Date: September 13, 2025 at 12:29 AM

Topic: starter kill wired correctly?

Posted By: w87will
Subject: starter kill wired correctly?
Date Posted: March 06, 2008 at 9:34 PM

Using a Viper 5900 in my 01 Grand Cherokee. I wired up the purple starter output wire AND the Green starter input both into the starter wire in my main harness near the key. Is this correct?

Replies:

Posted By: KarTuneMan
Date Posted: March 06, 2008 at 9:51 PM

Don't forget to cut the starter wire between those two.

-------------

Posted By: w87will
Date Posted: March 06, 2008 at 10:05 PM

Oh so I would just cut the starter wire in two and have the purple on one side and the green wire on the other? Which is what they meant by starter and key side?

Posted By: KarTuneMan
Date Posted: March 06, 2008 at 10:07 PM

You got it.... posted_image

-------------

Posted By: howie ll
Date Posted: March 07, 2008 at 5:15 AM

The diagramme says you must do it so why not follow it?

Posted By: w87will
Date Posted: March 07, 2008 at 8:16 AM

I didnt see any diagrams for it. I was under the impression I was to connect both wires together to the starter wire. But now I understand and it makes sense, lol. I appretiate your help, thanks alot.

Posted By: chriswallace187
Date Posted: March 08, 2008 at 4:58 PM

Also will, make sure the purple is going toward the starter motor and the green is towards the ignition switch...otherwise the remote start won't work.

-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Posted By: w87will
Date Posted: March 08, 2008 at 6:05 PM

Awesome. thanks alot for the help.

Print Page | Close Window