Hi! I have a 93 honda accord SE and a CS2011RS (crimestopper) alarm/remote starter. i havent really jumped into installing this yet, other than reading the installation instructions. i think i am going to be needing wiring schematics for my car, unless someone has already installed this alarm on a 93 honda accord before and would be willing to help me out. the install manual is here
https://www.crimestopper.com/techweb/InstructionBooks/Alarm/cs2011-install-2.pdf
One of the first questions i came up with is... "Connect to the negative horn trigger wire usually located near the steering column. If the vehicle horn circuit requires +12V, then a relay is required" does a honda accord require +12V for the horn circuit? well, if i used my handy-dandy multimeter and ever found the wire, i could test it myself i guess. maybe thats not such a good question afterall :P
okay - i guess i want to know if anyone else has done this install before, and if they have, do they have any comments or "words to the wise" before i start ripping my car apart. im a new installer, but i do enjoy projects such as these, and think i should be able to have this thing working quite well, with a little bit of help. i appreciate anything useful that you would be willing to share.
-------------
-SlappE
hey slappe heres the wire chart for the accord and as far as the horn ques goes, the alarm has a neg output for the horn so your ok there cause your horn is (-) but you might need some for the parking lights .....have fun take your time and dont rush, its your car and you dont wanna mess things up
https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1990-93&make=Honda&model=Accord&ID=17955&type=Alarm| Trunk Release | ORANGE / Silver Dots | in Harness Driver's Front Door Sill |
i cant find this... is there some other connection? what are the "dots"? do i need a relay to add a trunk pop to my 93 honda accord? thanks in advance
-------------
-SlappE