karr 2040 adding actuator
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102936
Printed Date: July 16, 2025 at 6:57 AM
Topic: karr 2040 adding actuator
Posted By: kvc63
Subject: karr 2040 adding actuator
Date Posted: March 10, 2008 at 6:49 AM
I have a 2005 Honda Civic DX Coupe with Value Package option.
It comes stock with manual door locks. - Currently has a Karr 2040 hooked up to the drivers door.
- I would like to add a 2nd actuator to the passenger door and
wire it into the Karr 2040. - I've found the functions of the 14 wire harness but was wondering what
else I needed. Like what relays...etc. Thanks.
Replies:
Posted By: tedmond
Date Posted: March 10, 2008 at 7:42 AM
you will need 2 relays for lock/unlock. any 30/40 amp automotive relay is good. and a roll of wire to run from the door to the alarm. thats about it
Posted By: Chris Luongo
Date Posted: March 10, 2008 at 8:50 AM
Just find the two wires that go to the actuator in the driver's door, and connect your new actuator(s) there.
Shouldn't need any relays or anything.
Make the two connections temporary at first. If the actuator in the passenger door goes backwards, reverse your two wires.
Posted By: tedmond
Date Posted: March 10, 2008 at 10:16 AM
oh man, chris does have a point. i was thinking you wanted your actuator to open driver door(driver priority unlock), then with double unlock, the passenger doors open with an alarm, but you just want them to open all at once. sorry for the misleading post.
Posted By: kvc63
Date Posted: March 13, 2008 at 5:59 AM
Thanks for the info. I'll post the results when I'm done.
|