pk module and 2nd ignition info

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102953
Printed Date: July 13, 2025 at 8:41 PM

Topic: pk module and 2nd ignition info

Posted By: da_vato
Subject: pk module and 2nd ignition info
Date Posted: March 10, 2008 at 9:44 PM

I have partially installed an Ungo RK1 remote start with a Directed 1700G bypass module. I do not know where this PassKey 3 module is or at least where to connect the ignition harness wire of the module. Also what do I do with the second ignition wire? I read I need to hook it up but I dont know what to, I missed something obviously (I believe this is the 10awg white wire in the ignition harness right)

Replies:

Posted By: da_vato
Date Posted: March 10, 2008 at 10:06 PM

Im sorry sleeping at the keyboard. This is an 2004 chevy silverado crew cab 2wd

Posted By: tedmond
Date Posted: March 10, 2008 at 10:36 PM

its passlock 2, from what i have.

IGN 1 - PINK (+)
IGN 2 - WHITE (+)
ACC - ORANGE (+)
STARTER - YELLOW (+)

if you are using a can databypass, you will jsut need to tap into the OBD connector. If you are using another type stilldata buy requires you to connect it at the steering collumn, there will be 3 wires in a black loom two white and a black if i remeber. It cal also be yellow and white.

Posted By: da_vato
Date Posted: March 15, 2008 at 10:00 PM

I got everything hooked up and working well except for one thing. During remote start the heater doesnt work. What wire am I supposed to tap into to get that working?

Posted By: techman93
Date Posted: March 15, 2008 at 11:00 PM

probably the orange since that is for accessories

-------------
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya

Posted By: da_vato
Date Posted: March 16, 2008 at 2:34 PM

you talking about orange on the trucks wiring? what do I put to it, an accessory wire?

Print Page | Close Window