novice, clifford 50.5 in 93 rx7
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102974
Printed Date: April 28, 2024 at 5:24 AM
Topic: novice, clifford 50.5 in 93 rx7
Posted By: uncle hungry
Subject: novice, clifford 50.5 in 93 rx7
Date Posted: March 11, 2008 at 6:48 PM
Hey guys I'm about to instal a clifford 50.5 without the remote start in a manual 93 Mazda rx7. I have some wiring diagrams from both Clifford and the factory wiring manual for the car. The car previously had a basic Audiovox system ( I removed all of it) although I have no idea if it worked as the car was not running when I bought it. Should I wire the new alarm with the factory alarm or should I just unplug the factory unit (how the audiovox was)? Also is it possible if I disable the factory alarm to use it's security indicator in the console instead of the Clifford led? Thank you very much for the help guys.
Replies:
Posted By: howie ll
Date Posted: March 12, 2008 at 5:15 PM
Copy the Audiovox wiring, the Clifford LED is 2.5 volts, the factory one would have to be the same to make it work.
|