remote start on 99 gmc
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102995
Printed Date: April 28, 2024 at 3:43 PM
Topic: remote start on 99 gmc
Posted By: dumbbitch
Subject: remote start on 99 gmc
Date Posted: March 12, 2008 at 9:18 AM
i have remote start on my 99 gmc truck and whenever i try to start it the factory security system wont let it start what do i need to do to bypass it
Replies:
Posted By: russ lund
Date Posted: March 12, 2008 at 9:27 AM
You could use a PLXR or a GMBP from bypass kit.
-------------
BigDog
Posted By: racing_bidule
Date Posted: March 12, 2008 at 9:36 AM
You have to use a Passlock II bypass module. iDataLink offers a module which does all the different variations of passlock or any other analog Passlock bypass of your choice. https://www.idatalink.com/store/index.php?l=product_detail&p=8&make=&model=&year=&carid=1254 ------------- If you fail on your first attempt, at least destroy all evidence you tried!
Posted By: dumbbitch
Date Posted: March 15, 2008 at 10:58 PM
i accidently cut the wires for the passlock 2 system on my 99 gmc i cut them between the resistors and the lock cylinder there isnt enough wire for me to just put them back together what canm i do its 11 here and i dont have
Posted By: techman93
Date Posted: March 15, 2008 at 11:03 PM
well the only thing you can try is this. Get them to touch temporarily and start car. With engine on disconnect connection. Shut the car off. See if you can start car again without those wires touching. If you can you have put it into a short term bypass mode while that circuit has an error. Then take it to have the ignition connection replaced as soon as possible.
-------------
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya
Posted By: dumbbitch
Date Posted: March 15, 2008 at 11:12 PM
ok sorry about how bad my typing was on that post i am freaking out about this and didnt notice any of it i have tried touching wires together and that didnt work any other suggestions
Posted By: dumbbitch
Date Posted: March 15, 2008 at 11:46 PM
i got my not starting problem fixxed but now i have a new problem my truck wont turn off lol if i remote start it and then turn the key on it wont turn off unless i pull the fuse out under the hood for the ignition if i start it with the key its fine and if i remote start it and remote kill it its fine but if i remote start it and then try to go somewhere and turn it off with the key it wont turn off what do i do
Posted By: techman93
Date Posted: March 16, 2008 at 12:03 AM
dont use remote start until your problem gets repaired by someone who will replace the messed up parts in your ignition cylinder.
did you hook up brake trigger to shut off the remote start?
-------------
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya
|