1700g on 2006 silverado

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103030
Printed Date: May 14, 2024 at 1:24 PM

Topic: 1700g on 2006 silverado

Posted By: dstyls
Subject: 1700g on 2006 silverado
Date Posted: March 13, 2008 at 12:13 PM

NEED HELP ON DOOR LOCKS,INSTALLING A AUTOPAGE RS900,INSTALL 1700G

VEHICLE UNLOCKS,BUT WON'T LOCK,INSTALL DEI 1700G WIRES,

RED-TO 12 VOLTS

BLACK-GROUND

BROWN / WHITE-NOT USE

GREEN/ BLACK-TO ALARM LOCK

VIOLET/BLACK-NOT USE

BLUE/BLACK-TO ALARM UNLOCK

RED / WHITE NOT USE

GREEN-TO CAR NEG DOOR TRIGGER

GREY/BLACK-POS DOMELIGHT

LIGHT BLUE-ALARM UNLOCK

BLUE-GROUND WHEN RUNNING FROM ALARM

PURPLE-PURPLE WIRE AT OD2 PLUG

NEED HELP?CAR UNLOCK ONLY,WILL NOT LOCK,DO I HAVE TO HOOK UP THE KEY SENSE WIRE/VIOLET/BLACK WIRE TO CAR

Replies:

Posted By: dstyls
Date Posted: March 13, 2008 at 2:51 PM

AND WHEN TRYING TO REMOTE START VEHICLE IT WILL COME ON AND DIE OUT,WHAT AM I DOIN WRONG?

Posted By: skee-weezy
Date Posted: March 13, 2008 at 3:15 PM

sounds like that interface isn't programmed to the car completely or needs to be flashed with some different software or something...... are u an installer.... or a d-i-y'er????

-------------
there can be only one.......

Posted By: dstyls
Date Posted: March 13, 2008 at 4:06 PM

D I Y

Posted By: brhaugen
Date Posted: March 13, 2008 at 4:21 PM

make sure you solder the data wire to pin 2 of the odb conn. then reset the 1700g and go through the programing again

Posted By: dstyls
Date Posted: March 13, 2008 at 5:57 PM

so you dont have to install the keysense wire from the 1700g,
i will check the purple wire from the 1700g to the obd2 conn,and how do yo ureset the 1700g module

Posted By: dswift
Date Posted: March 13, 2008 at 6:56 PM

it's in the manual. =0

or call text support 514-807-2888

-------------
"dont ground out!"

Posted By: johnson73801
Date Posted: April 30, 2008 at 1:47 PM

if reprogramming doesnt work u need to make sure that ur wire from ur rs unit that is grounded when active is hooked up to the blue wire on the 1700g. i had the same problem with my python system and that is what my prob was.