glass hatch on 2008 tahoe

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103112
Printed Date: May 31, 2024 at 6:27 PM

Topic: glass hatch on 2008 tahoe

Posted By: robh415
Subject: glass hatch on 2008 tahoe
Date Posted: March 16, 2008 at 10:06 AM

Do you know if I wanted the glass hatch to open, Do I need a relay or anything special? The original factory remote had that option. Thank you

Replies:

Posted By: dtk1
Date Posted: March 16, 2008 at 10:16 AM

no relay need it at all the bcm is on the steering column if you used a 1701 g and it doesn't pop u have to get it from the bcm i believe is pink or pink and black. back plug of the bcm make sure to unlock doors before you pop the hatch

Posted By: robh415
Date Posted: March 17, 2008 at 12:49 PM

I am using the 1701G.

So far I have the RED / White wire (-) 200mA channel 2 validity output on the python 990 connector H1 spliced to the RED / White (-) glass/hatch release or trunk open on the 1701G.

Now on the 1701G the Dark Blue (-) Glass/hatch status output is supposed to go to the (-) instant trigger input (trunk input/shunt) on thepython 990. That is what I can not find.

Thank you

Posted By: mikvot
Date Posted: March 17, 2008 at 1:55 PM

You can use H1/7 BLUE (-) multiplex input, zone 4 as your trunk trigger.

-------------

Posted By: robh415
Date Posted: March 17, 2008 at 2:49 PM

Thank you. That is what I had the first couple times. after looking into things I found that the rear wiper and the glass liftgate used the same fuse which was pulled out. Thanks again for your help

Print Page | Close Window