93 trans am keyless entry wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103116
Printed Date: May 13, 2025 at 4:21 AM

Topic: 93 trans am keyless entry wiring

Posted By: kjbjrich
Subject: 93 trans am keyless entry wiring
Date Posted: March 16, 2008 at 1:49 PM

I have a 93 Trans am with a factory Keyless entry system. I have purchased a Valet 712t keyless entry system to replace the OEM unit with. I need to know if anyone can tell me how to wire this unit into the existing wires??? colors etc. any help would be appreciated. the directions for the Valet are a little confusing.

-------------
K.Rich

Replies:

Posted By: Twelvoltz
Date Posted: March 16, 2008 at 8:13 PM

Here is a link to the wiring information for the '93 Firebird and here is a link to a diagram on how to wire them. Since your 712T has internal relays you do not need to concern yourself with the 85 and 86 terminals.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: kjbjrich
Date Posted: March 17, 2008 at 4:59 PM

Thanks for the reply, however I may be a little dumber than I thought! The original wiring has 11 wires to the control mod. the main wires are org which should be battery, unlock input org/blk, program input RED / blk, program input GRY, ground BLK, and then 2 tan wires? every document I have found do not show what any of these wires are supposed to connect to on the 712t

-------------
K.Rich

Posted By: Chris Luongo
Date Posted: March 18, 2008 at 6:50 AM

https://www.bfranker.badz28.com/fbody/alarm96up.htm

That site shows a Camaro, but you might find it to be of great help. Lots of pictures too.

Print Page | Close Window