I just bought a 1995 Grand Cherokee with a Avistart 3100. It just clicks once when either button in pushed, and nothing happens (lock, unlock,start, etc....). If anyone has an install manual that would be awsome,so I can get it up and working.
Thanks
-------------
To be old and wise, you must first be young and dumb.
do the park lites flash when you hit lock/unlock?
what happens when you press lock & unlock together?
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Took lower dash off last night, found bad 12v constant connection @ main harness, was just twisted together, not soldered, and was pulled apart just barely making contact. I took all connections apart and soldered all of then.
Park lights and locks were not connected at all. Just start function.
Also only has two button remote,lock/unlock and a Timer button, Have to hold both buttons to R/S.
All work good now.
Thanks Twelvoltz for the info.
-------------
To be old and wise, you must first be young and dumb.
www.avital.com had all the install and owners manuals available for download two or three days ago, but today it said the site is pending. maybe they didn't pay their bill or getting a new site????
Keep checking www.avital.com
This is my first forum. Please forgive any breach of eittiqute. I am on a ranch 1200 acre ranch 3hours from town.My dad was a mechanic and always said just because I was a girl was no excuse for not knowing my cars. I know the basics. I was changing the brake switchs on the master cylinder of my 1991 vanagon. Now it won't turn over. There is a I belive an after market anti-thief system.Small blk switch under dash. Light on the panel always stayed lite. It never worked. Now the light is flashing. I was going to trace the wires to see if I can find a modular then on to the coil and starter. I can't see how to get the bottom of the dash board off to continue the search. Any help woud be appreciated.