prostart ct 5400tw

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103214
Printed Date: June 04, 2024 at 5:52 PM

Topic: prostart ct 5400tw

Posted By: vfl4ever
Subject: prostart ct 5400tw
Date Posted: March 19, 2008 at 2:34 PM

I just installed a PROSTART CT-5400TW (3in1 Alarm and Starter unit) in my car and everything works great alarm and starter wise. Anyone know how to access the Installation-Programable Options on this unit because I want to turn off the Passive Arming (I got locked out of my car last weekend at a car wash when I left the key in the ignition on accessory and went to wash my car outside, thanks god the for cellphone in my pocket and my wife brought me the spare key from home to unlock the car door....) and increase the Engine run time to 15 mins (4mins default). I have read both Installation and User Guide manual and I can not find any information on howto access this Programable Option mode. Anyone or any installer out there know how to access this PROSTART CT-5400TW Installation-Programable Options, pleas help as it is really annoying with the passive arming when I am working on my car in the summer and the alarm will arm after 30 sec I close the last door.....

PS: I also want to test out the Shock Sense, Warn-away Sense option in the unit as well.

thankyou

Replies:

Posted By: tedmond
Date Posted: March 20, 2008 at 2:17 PM

the install manual will have all th einfo you need. Going to the website will give you the information, also, you need to flash the hood pin to enter programming. I dont remember, but its in the manual for sure.

Posted By: vfl4ever
Date Posted: March 24, 2008 at 11:02 AM

the owner manual do not have infor how to get into the Installation-Programable Options mode

it is not the same as the Programing mode where you can add remote or tach learning, I have downloaded and read the manuals for Prostart Units from their website and I stll do not see the infor how to get into Installation-Programable Options

Any installer for PROSTART unit out there can help please?

Posted By: vfl4ever
Date Posted: March 24, 2008 at 11:58 AM

I found my answer today after I called a installation bay in my town and the installer was nice enough to walk me through the steps to program in Installation-Programable Options mode....