viper 5700 stopped chirping?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103238
Printed Date: April 16, 2024 at 4:29 PM
Topic: viper 5700 stopped chirping?
Posted By: m2736185
Subject: viper 5700 stopped chirping?
Date Posted: March 20, 2008 at 1:34 AM
I have a Viper 5700 installed in my 2000 Neon. All of a sudden the status LED has been on constant instead of blinking and it no longer chirps on either the car or the remote. And yes the siren still works. I didnt even think this setting could be changed. Any ideas?
Replies:
Posted By: gottspeed
Date Posted: March 20, 2008 at 8:36 AM
Sounds like valet mode is on. Your manual will tell you how to get out of it.
I think its open door, turn ignition on then off, and hold valet button. I forget though.
Posted By: gottspeed
Date Posted: March 20, 2008 at 8:39 AM
Yeah you'll have to check the manual, it involves the remote, unlock, lock, unlock after door open, ignition cycle.
Look it up, I just did it yesterday and I still can't remember.
Posted By: swamprat323
Date Posted: March 20, 2008 at 9:33 AM
2 ways to do it
1) by remote---- open door hit lock then unlock then lock again
2) by key turn key to ign then back off then hit valet button once this needs to be done in less then 10 sec but dotn go to fast
|