fast fortin bypass on escape

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103249
Printed Date: May 09, 2025 at 6:28 PM

Topic: fast fortin bypass on escape

Posted By: csb41502
Subject: fast fortin bypass on escape
Date Posted: March 20, 2008 at 12:26 PM

i got everything hooked up but it didnt program the right way and now all the bypass does is blink and nothing else what can i do?????

Replies:

Posted By: mikvot
Date Posted: March 20, 2008 at 12:36 PM

What bypass is it? What year of escape? If it's a keyoveride sl2, you're screwed....it would have to be sent back. I've been able to program the keyoveride all to multiple vehicles, so hopefully you have this one. Also, what is the car doing, to make you think the bypass didn't program correctly? give us a litlle more.

-------------

Posted By: csb41502
Date Posted: March 20, 2008 at 12:40 PM

it is a keyoverride sl2 i dont think it programmed cause the theft light never went off and the light blinks more that 10 times all it does is blink now and the car wont start its an 03 escape

Posted By: csb41502
Date Posted: March 20, 2008 at 12:42 PM

also when the key is in the ignition i can remote start it

Posted By: mikvot
Date Posted: March 20, 2008 at 12:50 PM

Punctation? That's one big sentence. Ok....so you held the button on the bypass down....plugged in the connectors....wait for led to go solid red, let go of programming button.....insert one key..wait for security light to go off, insert second key...wait for security light to turn off.......remote start the vehicle.

Unplug the 4 pin power from the bypass. Hold the button down and reinsert the plug. If the red light on the bypass keeps flashing, it is already programmed and cannot be programmed again.

-------------

Posted By: csb41502
Date Posted: March 20, 2008 at 1:48 PM

sorry about the punctuation. i got everything to work.i finally got thru to the company and they walked me thru it.i appreciate everyones help thru my whole remote start install.all works great with no problems.thanks again