Print Page | Close Window

cs 2014 dp fm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103486
Printed Date: May 01, 2024 at 10:49 PM


Topic: cs 2014 dp fm

Posted By: loosewire
Subject: cs 2014 dp fm
Date Posted: March 29, 2008 at 8:01 AM

I have a 2006 Chrysler 300 with a CS 2014 alrm system installed. Interior light was left on and drained batt down. Car barely started but now alarm system does not function. LED will not light, but when I disconnected the system antenna wire, alarm went off. Is this unit in some kinda sleeper mode? How do I wake it back up? I thought that maybe the remotes lost connection but I can't even get this system to react at all.



Replies:

Posted By: prdjr165
Date Posted: March 29, 2008 at 10:39 AM
You might have to re-program the remotes to the alarm brain.The procedure should be in the manual.Also you can check the alarm fuses to make sure there good.




Posted By: loosewire
Date Posted: March 29, 2008 at 2:27 PM
is there any way to reset the whole alarm system?





Print Page | Close Window