remote start 2008 camry
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103503
Printed Date: July 12, 2025 at 10:41 AM
Topic: remote start 2008 camry
Posted By: ecommo
Subject: remote start 2008 camry
Date Posted: March 29, 2008 at 6:13 PM
I am having a problem with getting the remote start to work on a 2008 camry. i have a xk05 bypass module. according to the manual, the wires for the computer is 10 and 11 in the ecm under the hood. there is an axception for the camry if it is a 4 cylinder. my vehicle is a 4 cylinder. there for you need to use didderent wires and the computer is located behind the glove compartment and not under the hood. i need to know which is the right location and the right wires. thanks.
Replies:
Posted By: tonyberg
Date Posted: March 29, 2008 at 8:04 PM
i never run all the way across the car when I use the XK05, the IMO and IMI wires are dark blue and green. They are in a harness that runs right above the gas pedal its a smaller harness that goes behind the heater core, just before it goes behind the heater core it gets covered in some split loom. I pop the little chunk of floor vent off and then i have plenty of room to get up there.
Posted By: ecommo
Date Posted: March 29, 2008 at 8:33 PM
so what you are saying is that the wires you use are coming from the ecm inside the car on drivers side and not under the hood or on the passenger side behind the glove compartment?
Posted By: tonyberg
Date Posted: March 30, 2008 at 7:29 AM
correct. never do i go under the hood in a camry.
|