ground when armed output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103530
Printed Date: July 07, 2025 at 10:23 PM

Topic: ground when armed output

Posted By: davesparkave
Subject: ground when armed output
Date Posted: March 30, 2008 at 8:01 PM

i know what its used for i already have a electroluminescemt armed indicator hooked up to it,,,but i want to know which way to hook up the diode so that i can attach my orange wire from my t360 tilt sensor up to my alarm?

Replies:

Posted By: spookiestylez
Date Posted: March 30, 2008 at 9:54 PM

https://www.the12volt.com/diodes/diodes.asp

-------------
RTFM

Posted By: KPierson
Date Posted: March 30, 2008 at 10:00 PM

The output is ground, so if you want to isolate two devices you would want the stripes on each diode to closest to the alarm unit (facing away from the sensors/devices).

-------------
Kevin Pierson

Print Page | Close Window