autoloc and clifford 3.5

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103578
Printed Date: May 02, 2024 at 4:04 PM

Topic: autoloc and clifford 3.5

Posted By: mit41078
Subject: autoloc and clifford 3.5
Date Posted: April 01, 2008 at 12:33 AM

Hey guys. I installed the alarm system a few years ago and have decided to shave the doors and put in an autoloc system. I could use some help or diagrams on how to wire this into my existing alarm. How do i make each door release individually instead of both at the same time? Any help would be greatly appreciated. Michael

-------------
Low and Fast

Replies:

Posted By: KarTuneMan
Date Posted: April 01, 2008 at 7:34 AM

And how do you get into the car when the battery is dead?

-------------

Posted By: mit41078
Date Posted: April 02, 2008 at 12:43 AM

release cables

-------------
Low and Fast

Posted By: mit41078
Date Posted: April 09, 2008 at 8:00 AM

can anyone help me??

-------------
Low and Fast

Posted By: mit41078
Date Posted: May 13, 2008 at 7:51 AM

I tried posting this once before and really didnt get a response so hopefully i will this time. I have a clifford 3.5 on my 95 silverado and i bought an autoloc shaved door kit. My question is how do i connect the autoloc into the clifford and make it all work together? Any help would be greatly appreciated. Any wiring diagrams would be awesome or at least some direction to turn to.

-------------
Low and Fast

Posted By: mit41078
Date Posted: May 14, 2008 at 8:41 AM

Someone please help

-------------
Low and Fast

Print Page | Close Window