1997 cirrus, door trigger
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103632
Printed Date: April 30, 2024 at 10:46 PM
Topic: 1997 cirrus, door trigger
Posted By: start25
Subject: 1997 cirrus, door trigger
Date Posted: April 02, 2008 at 1:59 AM
For door trigger wire... Is there other wires other then yellow in front of the fuse box? I think Yellow wire is the dome light wire, and its giving false alarms. Please help.... Also where can I find factory disarm wire?
Replies:
Posted By: chriswallace187
Date Posted: April 02, 2008 at 3:01 AM
Factory disarm should be GREEN/ orange in either kick or at the fusebox - Positive thru 430 ohms disarms and positive thru 900 ohms arms.
As far as the door trigger that's all the info I've got...I don't see that causing problems though, usually it'll just take the alarm until the domelight goes out before it arms...can you describe in more detail what it's doing?
-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
Posted By: Chris Luongo
Date Posted: April 02, 2008 at 11:29 AM
I've seen a few Chrysler door pinswitches go bad. Usually the driver's door, since it gets the most use.
Unscrew the driver's door pinswitch, disconnect the wire, and leave it like that for a few days and see if the falsing stops.
If it doesn't false anymore, pick up a new pinswitch. Should be cheap.
|