99 dakota clutch bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103663
Printed Date: July 20, 2025 at 10:22 AM

Topic: 99 dakota clutch bypass

Posted By: jrush79
Subject: 99 dakota clutch bypass
Date Posted: April 02, 2008 at 10:32 PM

I have a compustar 1w900fm s with the 4200 brain. I've been having some problems trying to get the clutch bypass to work. If I disconnect the clutch switch and just connect the two wires together it will start but I can't make it work with the clutch switch intact. I need to use a relay, right?

85 - constant 12v
30 - one clutch wire
87 - other clutch wire
86 - ?

Should I be using the (-)2nd starter output or the ground when running output? Or is there a different way to do this?

Thanks, Jon

Replies:

Posted By: KarTuneMan
Date Posted: April 02, 2008 at 10:37 PM

The dark blue / YELLOW at the clutch switch, it needs the output from your remote starter INSTEAD of connecting it at the ign. harness.

No relay is needed. just connect your remote starter "start" wire directly to the clutch switch.

-------------

Posted By: jrush79
Date Posted: April 03, 2008 at 2:25 PM

Thanks! The remote starter works and you still have to push the clutch in to start it with the key.

Jon

Print Page | Close Window