Help 94 mazda mpv anti-lock brake lite
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10374
Printed Date: July 27, 2025 at 2:37 PM
Topic: Help 94 mazda mpv anti-lock brake lite
Posted By: o1cbc
Subject: Help 94 mazda mpv anti-lock brake lite
Date Posted: March 03, 2003 at 8:21 PM
I installed a autopage rs-650 in a 94 mazda mpv and when you start the car with the remote the anti-lock brake lite goes on even when you put the key in the lite stay's lit. When you start the car with the key the lite doesn't come on. Please help me.
Thank You
o1cbc@aol.com
Brad
Replies:
Posted By: JWorm
Date Posted: March 03, 2003 at 8:39 PM
You missed a 2nd ignition (or accessory) wire. I would look up the wire color, but I'm too lazy to do it right now.
Posted By: jrilla
Date Posted: March 03, 2003 at 10:34 PM
My wire diagram only shows one acc and one Ign. If there is a Blue wire in the ignition harness test that one. It may need to powered as an accessory wire though. JWOrm is right though, it sounds like you just need to power up another wire coing from the key cylinder.
-------------
J Rilla
Owner/Installer
Posted By: o1cbc
Date Posted: March 04, 2003 at 7:22 AM
I hooked up ignition 1 to the BLACK/ white the ignition 2 to BLACK/ red and acc to blue/red i'll see if there is any more wire's that get power when the key is turned on
Thank's
Brad
|