Print Page | Close Window

Ford Mustang 1965

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10382
Printed Date: July 28, 2025 at 10:28 AM


Topic: Ford Mustang 1965

Posted By: Mr.Tech
Subject: Ford Mustang 1965
Date Posted: March 03, 2003 at 9:28 PM

does anybody have any info on them to install a Viper300esp
Mustang 1965 wiring Info Need



Replies:

Posted By: jrilla
Date Posted: March 03, 2003 at 9:44 PM
This is what I have for a '66. It should be enough to get you going.

12v constant I am not sure of. But it cant be hard to test for. It will be in the Ignition harness along with the Starter, Ignition and Accessory wires. It might be Yellow since evey Mustang listed has Yellow for 12v constant. It will be a heavier gauge wire.

STARTER is RED / blue in the ign harness, behind cluster

IGNITION is RED / green in the ign harness, behind cluster

PARKING LIGHTS are positive and blk/wht & blu/red at the switch in driver side dash

DOOR TRIGGER is BLACK/ blue at the underdash domelight and it is positive.

-------------
J Rilla

Owner/Installer




Posted By: Mr.Tech
Date Posted: March 04, 2003 at 2:25 AM
Thanks




Posted By: jrilla
Date Posted: March 04, 2003 at 8:59 AM
no problem


-------------
J Rilla

Owner/Installer





Print Page | Close Window