compustar anti grind/starter kill not wor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103954
Printed Date: May 14, 2025 at 8:28 PM

Topic: compustar anti grind/starter kill not wor

Posted By: toyota1
Subject: compustar anti grind/starter kill not wor
Date Posted: April 13, 2008 at 7:25 PM

Hey all,
I have completed the install of my new compustar pro p2wfm9000-as unit. I previously had a shop do a 2wss-as install awhile back, so I was basically just upgrading the unit. I removed the old alarm and installed the new by following the old install wiring but not everything seems to work except for the anti-grind and starter kill feature? I know the starter kill needs to be programmed but not even the anti-grind works? Any ideas? Thanks for the help.

Replies:

Posted By: KarTuneMan
Date Posted: April 13, 2008 at 9:10 PM

Have you read the manual?

Try that first!

The pro's are different.

Where did you buy your unit.... ?

-------------

Posted By: toyota1
Date Posted: April 13, 2008 at 9:27 PM

I have read the manual many times, even the online manual. They mention nothing. I bought my unit online. I think I may have reversed the ignition wiring?

Print Page | Close Window