Multi pulse to one
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10421
Printed Date: June 04, 2025 at 11:05 AM
Topic: Multi pulse to one
Posted By: MaxV6
Subject: Multi pulse to one
Date Posted: March 04, 2003 at 11:29 AM
Could this be done? I have a Remote starter unit that activates only on a single pulse input and want to connect it to a factory alarm.
If I press the factory remote door lock once it locks the doors which is fine, If I press it the second time (or third) I would like it to activate the remote start.
How could I block the first signal and send only any signals after the first? Relays/capacitors?
I understand that this is programmable on some remote starter units but the one I have is not and I thought it might be an interesting problem to solve.
Thanks,
BTW: I am a newbie so excuse me if this query sounds dumb.
Replies:
Posted By: jrilla
Date Posted: March 04, 2003 at 11:43 AM
What add-on alarm is that? That is retarded.
-------------
J Rilla
Owner/Installer
Posted By: the12volt
Date Posted: March 04, 2003 at 12:04 PM
What vehicle and remote start do you have? -------------  the12volt • Support the12volt.com
Posted By: MaxV6
Date Posted: March 04, 2003 at 4:33 PM
> What add-on alarm is that? That is retarded.
To the product's defence, I want it to do something it was not designed to.
> What vehicle and remote start do you have?
The car is a 2002 Maxima and the RS is a stand alone, bottom of the line bulldog with remote which I got a while back and is sitting around doing nothing. It does have an input (-) line which activates the RS on a single pulse and that is why I'm playing with to see if I can eliminate carrying two remotes.
Thanks again guys.
Posted By: jrilla
Date Posted: March 04, 2003 at 5:10 PM
I see what your saying, I thought it was an addon unit that didnt have an option of making the trigger require three pulses.
-------------
J Rilla
Owner/Installer
Posted By: floaterr
Date Posted: March 05, 2003 at 6:55 AM
Can you pop the trunk by remote? you could use that output and cut out the trunk release motor (you'd have to use the key from that point on).
When you hit the "unlock" button more then once do the locks actually keep trying?
|