DEI LED output question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10427
Printed Date: May 14, 2024 at 11:52 PM

Topic: DEI LED output question

Posted By: Speed2Sound
Subject: DEI LED output question
Date Posted: March 04, 2003 at 1:01 PM

What type of output is the led output on DEI systems? Is it a positive flashing or a negative flashing output? I'm designing a circuit to run hyperbright LED's straight from the existing LED output from a viper 800. I want the hyperbrights to flash with the existing LED.

thanks.

-------------
90 Mustang GT - in the early design stage - project nasty street car

Replies:

Posted By: auex
Date Posted: March 04, 2003 at 6:08 PM

It is a +2(two)V negative flashing output. It can support upto five leds wired in series.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: Speed2Sound
Date Posted: March 04, 2003 at 6:28 PM

Thanks

-------------
90 Mustang GT - in the early design stage - project nasty street car

Print Page | Close Window