Keyless Entry - cannot find

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10428
Printed Date: May 29, 2024 at 2:57 AM

Topic: Keyless Entry - cannot find

Posted By: ashelley
Subject: Keyless Entry - cannot find
Date Posted: March 04, 2003 at 1:10 PM

Hello,

I bought a car with an UNGO SAS6400 alarm. I bought power door locks thinking that this alarm would support keyless entry. I have been unable to locate the keyless entry feature on this alarm. Does it have one, anyone have this alarm?

Replies:

Posted By: Chris Luongo
Date Posted: March 04, 2003 at 8:11 PM

I'm not familiar with that model alarm, but you might be able to download an installation manual at their website; this will list the functions of each of its wires.

In general, though, look for a two-pin or three-pin plug that sits all by itself. The middle pin is likely to be constant positive, and the two outer pins would be your lock and unlock outputs. Test the two outer pins while operating the alarm remote, and see what you get.

Posted By: 10nesne1
Date Posted: March 05, 2003 at 12:08 AM

The Ungo SAS6400 alarm system is more than 10 years old alarm system. It has on board relays for the keyless entry system.

Here is the diagram:

https://www.techneltd.com/6400-di.htm

https://www.techneltd.com/doorlock64-65.htm

Posted By: ashelley
Date Posted: March 05, 2003 at 8:55 AM

Thank you very much. HAHA i know this alarm is old. The thing is huge.

Print Page | Close Window