Print Page | Close Window

responder le d2d bypasskit

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104318
Printed Date: May 05, 2024 at 2:01 PM


Topic: responder le d2d bypasskit

Posted By: tbone587
Subject: responder le d2d bypasskit
Date Posted: April 27, 2008 at 11:08 PM

My friend got the Responder LE (PYTHON 862) and an xk01 bypass module which will handle the locks, doortriger, trunk pop, etc.  The alarm claims to support d2d connection for the xpresskit modules, but I am not sure how it hooks up to the brain.  I have an xkloader programmer with a cable I connect the bypasskits, but i dont see anywhere it will plug in between the alarm and the bypass module it self.  There is a port where it plugs in, but then the other end of the cable doesnt go into the bypasskit.  Is there another cable I need to purchase, or is what im doing not possible and I misunderstood the capabilities of this alarm.




Replies:

Posted By: tbone587
Date Posted: April 28, 2008 at 7:43 AM
Nobody knows??  I was thinking I may be able to use the same cable a bitwriter uses.



Posted By: big sexy lac
Date Posted: April 28, 2008 at 9:59 PM
You need to buy a d2d cable, the xloader is used to update the firmware it doesn't connect the brain. You can also just go w2w if you don't want to get the d2d cable.

-------------
WELL?


Print Page | Close Window