2008 tacoma with viper 5701
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104353
Printed Date: May 13, 2025 at 10:39 PM
Topic: 2008 tacoma with viper 5701
Posted By: craniumvibratio
Subject: 2008 tacoma with viper 5701
Date Posted: April 29, 2008 at 1:59 AM
I have a 08 Tacoma and I'm installing a viper 5701. I have a couple of questions about a couple of things. First I know I have to activate the second starter wire. Do I do this with a Second relay connected to the violet wire on the aux harrnis? Second For the ignition's. The first ignition is self explanatory and the second is foggy at best. There is a pink/white wire for ignition 2 but there is also a pink/black 87a ignition 2/flex relay. Should I use this one instead of the pink/white?
Hope I filled in all the blankes.
Thanks in advance
Brandon
Replies:
Posted By: hurleyloser
Date Posted: April 29, 2008 at 3:16 AM
for the second starter use a relay activated by the (-) starter trigger output from the alarm, use pink/white for second ignition.
Posted By: Mike M2
Date Posted: April 29, 2008 at 6:42 AM
The violet wire is the negative starter wire for the relay. You are correct....
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: craniumvibratio
Date Posted: April 29, 2008 at 9:48 AM
That sounds great but what does the pink black wire do? I just want to know now.
|