neon ''fuse'' code in odometer display?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10443
Printed Date: May 13, 2024 at 10:51 PM

Topic: neon ''fuse'' code in odometer display?

Posted By: mobileinstallat
Subject: neon ''fuse'' code in odometer display?
Date Posted: March 04, 2003 at 5:55 PM

this is a new one for me. I have the word "fuse" spelled out in the display for the odometer. flashes from the word "fuse" to the milage. replaced the blown fuse but still there. If anyone ran into this before let me know.hoping theres a reset or a turn off via diagnostic plug, disconnect batt ect...
Thanks again men.
Mark

Replies:

Posted By: themagicone
Date Posted: March 04, 2003 at 6:28 PM

what kind of car and what year?

Posted By: mobileinstallat
Date Posted: March 04, 2003 at 6:36 PM

dodge neon 2001 or 2002 dont remember, droped it back off at the car dealer tonight. first job in the morn.

Posted By: mobileinstallat
Date Posted: March 09, 2003 at 8:54 AM

2001 Dodge Neon. The word "FUSE" flashes in the odometer readout. All fuses are good. Replaced cig lighter fuse. Now I'm looking for the "clear" procedure/reset combination to reset the car.
Any ideas?
PS: already tried to unhook the bat for an hour- no help.

Thanks,
Mark

Posted By: Velocity Motors
Date Posted: March 09, 2003 at 9:01 AM

I'll get back to you next week on this. I'll ask my friend at the local Dodge dealership on how to reset the FUSE error after it's been cleared.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: mobileinstallat
Date Posted: March 09, 2003 at 9:23 AM

Jeff, Thank you.
I plan to do the same. My dodge dealer stops are next week, end of week. If you get the tip first please let me know.
Mark

Posted By: Velocity Motors
Date Posted: March 10, 2003 at 2:22 PM

Hey Mark, talked to the tech at Dodge & they said they never heard of this before. The only thing he can suggest is that you check all the fuses and replace any that need replacing & after you replace it there should be no need to reset. Also, if you need the reset done, it has to be done with the diagnostics scanner.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: mobileinstallat
Date Posted: March 25, 2003 at 10:00 AM

fyi men:
dome light bulb blown. this was my prob.
after talking to a Dodge mec, he gave me a list of things to fix the "fuse" prob- 1.)ODB fuse in fuse box. 2.)trunk light or 3.)dome light.
restart car light will go away.

Posted By: mobileinstallat
Date Posted: March 25, 2003 at 10:03 AM