Print Page | Close Window

clifford rsx 3.3 manual

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104573
Printed Date: April 30, 2024 at 7:14 AM


Topic: clifford rsx 3.3 manual

Posted By: jonchos
Subject: clifford rsx 3.3 manual
Date Posted: May 08, 2008 at 12:23 PM

I am looking for this manual. Is it true there is less wires to connect to install the alarm and RS?
Thank you in advance



Replies:

Posted By: tedmond
Date Posted: May 08, 2008 at 2:08 PM
not true. if you install an alarm only then its not many wires, connecting the remote start portion, will be more wires but not many.



Posted By: howie ll
Date Posted: May 08, 2008 at 4:31 PM
Actualy if we are using the Matrix 3.3x then there is less wiring but only if you add proprietory CAN interfaces, I've played with a couple and just downloaded the install manual. Sorry Ted.



Posted By: tedmond
Date Posted: May 08, 2008 at 7:03 PM

none take howie, you are the clifford pro.

yea i was going to mention it would be less wires only if he used a can data bypass, but not all cars are compatable and he didntmention what car so didnt mention it posted_image




Posted By: jonchos
Date Posted: May 08, 2008 at 9:12 PM
Is for a nissan frontier 2005. I have installed several alarms in the past. All of them DEI. I just saw the new RSX 3.3 and a guy was saying how there is less wires than the 70.5X So I was curios. I will be buying one and installing it here soon. Hopefully everything will go fine.


Print Page | Close Window