2003 impala door locks
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104597
Printed Date: May 16, 2024 at 11:57 PM
Topic: 2003 impala door locks
Posted By: impala_man2003
Subject: 2003 impala door locks
Date Posted: May 09, 2008 at 12:38 PM
I recently installed a keyless/entry alarm. Everything is working fine except for my brake lights and turn signal. I know that I have to diode isolateto get them to work properly. The problem I am haveing now is that i keep hearing a relay click on and off aven if the car is competly off. I have know idea where it is coming from all i know is that what
ever it is causing my battery light to come on and go off for a split second which also causes the reverse lights to flash. I am going to diode isolate to see what happens any suggestiions.
-------------
L67 Master (GM 3.8 SC)
Replies:
Posted By: dswift
Date Posted: May 09, 2008 at 1:26 PM
Ummm sounds to me like your grabbed some wrong wires there buddy. The clicking noise is a relay triggering. I would post your install here. Copy paste your wire schematic and what keyless entry system you installed and what wire you connected to where.
-------------
"dont ground out!"
Posted By: chriswallace187
Date Posted: May 09, 2008 at 2:02 PM
I second the "wrong wire" explanation. There should only be 3 wires on that car which need diode isolated IIRC - the door triggers and the (-) parking light flash(needs isolated from the BCM).
-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
Posted By: Mark Mizenko
Date Posted: May 10, 2008 at 10:10 AM
You can get a Blue wire at the switch that will do (-) Pk Lights, no relays needed.
|