Print Page | Close Window

97 dodge grand caravan, autopage rs 900

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104608
Printed Date: July 07, 2025 at 2:09 PM


Topic: 97 dodge grand caravan, autopage rs 900

Posted By: spunkys ram
Subject: 97 dodge grand caravan, autopage rs 900
Date Posted: May 09, 2008 at 11:37 PM

I just purchased a brand new AutoPage RS-900 for my 1997 Dodge Grand Caravan (3.3 motor) and I'm looking for info.  The vehicle DOES NOT have factory keyless, just power windows/locks.  It does have a rear blower control for the climate control system.  I have never installed an alarm/remote start but am very experienced with car electronics.  What I'm looking for is wiring info specific to my vehicle.  I need to know if/what diodes and/or resistors/relays I may need BEFORE I start the job.  I just want to make sure I don't have to stop halfway through.  Also, what is the best way to attach the wires to the factory harness?  Is there an aftermarket T-harness available that would work with my vehicle or should I just solder the wires?  I'll stop rambling, any info would be great.  Thank you in advance.

Kris




Replies:

Posted By: another-kelly
Date Posted: May 10, 2008 at 9:28 AM
https://64.85.6.121/diagrams/printpage.asp?ModelID=13356&MakeID=16



Posted By: tedmond
Date Posted: May 10, 2008 at 11:30 AM
forget the bulldog tharnesses. just solder your wires and look for the diagrams here.https://www.the12volt.com/installbay/alarmdetail/675.html


Print Page | Close Window