remote start, 1993 chevy suburban

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104620
Printed Date: July 07, 2025 at 10:38 PM

Topic: remote start, 1993 chevy suburban

Posted By: sworrix222
Subject: remote start, 1993 chevy suburban
Date Posted: May 10, 2008 at 12:42 PM

i have a valet 562t and a 1993 chevy suburban....can anybody tell me where i hook up the 2nd ignition output i have the first ign output hooked to the pink heavy gauge wire in the steering colum...or bcan anybody give me a complete breakdown of the wiring...please....

Replies:

Posted By: KarTuneMan
Date Posted: May 10, 2008 at 1:06 PM

The answer to your question (s) can be found behind the little "search" button at the top right of the screen.

Check it out...... posted_image

-------------

Posted By: tedmond
Date Posted: May 10, 2008 at 1:14 PM

the car only has one ignition and two acc wires but only one is needed.

Constant 12V+	Red	Ignition Switch Harness
Starter	Yellow	Ignition Switch Harness
Ignition	Pink	Ignition Switch Harness
Accessory	Orange	Ignition Switch Harness
Tach	White	Coil

Posted By: sworrix222
Date Posted: May 10, 2008 at 11:44 PM

hey thanks for the help.....tedmond...and kartuneman go back to dic*land.......you need to do some searching.....

Posted By: tedmond
Date Posted: May 11, 2008 at 6:56 AM

whoa whoa chill out buddy. KTM is a friend of mine, so dont bash anyone on the site. he actaully has more knowlege than myself.

Posted By: tedmond
Date Posted: May 11, 2008 at 6:57 AM

this infor should have been found easily without asking a question. look under vehicle wiring.

Posted By: sworrix222
Date Posted: May 11, 2008 at 12:49 PM

i apologize i just felt he was coming of a little rude i thought a forum was for people like me to find help i apprecieate the help.......sorry again......shawn

Posted By: techman93
Date Posted: May 12, 2008 at 10:57 PM

Some of us on here just get wise assy about some of these dumb questions that come up on here so don't take it personally. We don't discriminate we are wise to anyone... except to the moderators and anyone having more postings that yourself. Rookies beware...all dumb questions will have a dumb but witty answer posted_image

-------------
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya