08 silverado, door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104642
Printed Date: May 11, 2025 at 2:27 AM

Topic: 08 silverado, door locks

Posted By: sstrawsb
Subject: 08 silverado, door locks
Date Posted: May 11, 2008 at 2:32 PM

Happys Mothers Days everyone.

Need some help on a 08 Silverado im working on. Im using the XK01 for the door locks but the data wire they show to use on the OBD plug isnt there. The remote start wasnt bad at all once I stopped munching on chips and salsa :)

Any help would be appreciated.

Thanks

Sean

Replies:

Posted By: gus1
Date Posted: May 11, 2008 at 6:10 PM

Flash it for the correct firmware for that year of truck (GMDL6 I believe) Data wire is green, pin 1 of the ALDL.

-------------
Wherever I go, that is where I end up......

Posted By: dtk1
Date Posted: May 11, 2008 at 6:12 PM

what firmware do you have on the XK01 ? the pin number on newer GM its pin number one of the OBD 2 connector

Posted By: sstrawsb
Date Posted: May 11, 2008 at 11:24 PM

blahh. I knew it. For some reason I thought the green wire(pin 1) wasnt correct. I left it in the shop over night and will finish it up in the am.

Just for reference how are you just doing the passlock 3?

Posted By: gus1
Date Posted: May 12, 2008 at 1:42 AM

The ideal module is either the ADS thing from iData, or the CAN-SL2. Both take care of locks and PK3+ very nicely on the newer GM stuff. Very stable, works extremely well all around.

-------------
Wherever I go, that is where I end up......

Print Page | Close Window