keypad combination starter kill
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104675
Printed Date: May 10, 2025 at 4:51 AM
Topic: keypad combination starter kill
Posted By: jonathan710
Subject: keypad combination starter kill
Date Posted: May 12, 2008 at 8:41 PM
I bought this and put it in it works but my remote starter doesnt work anymore so i tryed to move the relay to after the remote start relay and now the car doesnt start from the key or by the remote start any help would be great and the starter kill says that it would work with a remote start system
-------------
Jon
Replies:
Posted By: jonathan710
Date Posted: May 12, 2008 at 8:46 PM
Sorry i forgot to say that i have a dodge stratus 2001 with a 2-way pager alarm and remote starting system i don't know what the model number is all i know is that its a THOR 2 WAY LCD REMOTE PAGER DETECTOR CAR ALARM SENSOR B if you search it on ebay you can find it along with the starter kill
-------------
Jon
Posted By: hurleyloser
Date Posted: May 13, 2008 at 1:10 AM
the keypad starter kill relay should be wired in after the key, then the remote start. So...
1. Key Cylinder
2. Keypad relay
3. Remote start
4. Starter
-------------
MECP Master Certified Technician
ASE A6 Certified Technician
Posted By: jonathan710
Date Posted: May 13, 2008 at 6:07 AM
Does anyone know what wire i would hook it up and does anyone know how i would hook up a power window modulator? And which wires i would hook it in to lol i cant figure that out wither lol
-------------
Jon
Posted By: hurleyloser
Date Posted: May 13, 2008 at 10:13 AM
window modules need to go get hooked up to the window motor wires, typically found in the driver's door boot.
-------------
MECP Master Certified Technician
ASE A6 Certified Technician
Posted By: jonathan710
Date Posted: May 13, 2008 at 3:22 PM
i tryed that but when i hook it up to the wires the windows didnt work at all and to i had to hook the wired back together that went from the switch to the motor and then the windows worked once again
-------------
Jon
|