2005 denali, viper, perimeter lighting

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104680
Printed Date: May 09, 2025 at 9:15 PM

Topic: 2005 denali, viper, perimeter lighting

Posted By: official_style
Subject: 2005 denali, viper, perimeter lighting
Date Posted: May 13, 2008 at 12:06 AM

On a 2005 yukon denali, with the viper 5900 alarm system, is there any way to have the factory perimiter lighting work? This is the feature that will keep the exterior lighting on when the truck is locked for the amount of time set in the driver control settings, and it will also illuminate when the truck is unlocked. any way to get this working?

Replies:

Posted By: Chris Luongo
Date Posted: May 13, 2008 at 7:52 AM

Is it already installed? Do you know what type of bypass module was used?

I never really paid attention when locking........but I'm pretty sure that on those trucks, with a GM-DLBP bypass module, the perimeter lighting does work when unlocking.

Also, it must be dark outside, and the car's engine must be off. If it's running under remote start, perimeter lighting doesn't work.

Print Page | Close Window