2008 crv, tach wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104798
Printed Date: June 15, 2024 at 5:07 PM

Topic: 2008 crv, tach wire

Posted By: slicksam
Subject: 2008 crv, tach wire
Date Posted: May 17, 2008 at 3:01 PM

Hi Guys,

I just bought the new Honda CR-V 2008.

It has the original alarm on it, I have been checking around for wiring information. I noticed it is pretty straight forward.

I can connect the doorlocks and arm/disarm in the driver kick panel.

I only have 1 question, I would like to know if there is a place that I can connect my tach wire on the inside of the car?

-------------
Testing is the key

Replies:

Posted By: cmk0808ny
Date Posted: May 17, 2008 at 3:56 PM

door lock and alarm wires are below the fusebox grey tapped harness. very thin wires.

tach is outside at coil or injector.

Posted By: slicksam
Date Posted: May 17, 2008 at 5:01 PM

As I say in my previous post.

I would like to know if there is a place that I can connect my tach wire on the inside of the car?

I want to try to keep all my wires on the inside.

I did some searching and I seen that on top of fuse box pin 1 blue is a tach output.

Can someone confirm?

thanks

-------------
Testing is the key

Posted By: KarTuneMan
Date Posted: May 17, 2008 at 8:19 PM

Slick, Astro shows no tach inside the rig. They suggest @ the ECM (behind the battery) posted_image

-------------

Print Page | Close Window