2008 chevy silverado alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104832
Printed Date: May 02, 2024 at 3:31 AM
Topic: 2008 chevy silverado alarm
Posted By: tbone587
Subject: 2008 chevy silverado alarm
Date Posted: May 19, 2008 at 12:07 AM
I am doing a 2008 Chevy Silverado Alarm/Remote Start combo and am a little confused on a few things. What is required for hooking up the accessory wire? Is there a mux connection I have to cut and use relays and resistors, or is this not necessary? Does the xk06 bypass kit take care of the functionality of that accessory wire activation? The module does require you to cut an accessory wire at the transponder interface and connect to the bypasskit. Please let me know. Everything else seems pretty straight forward.
Replies:
Posted By: dtk1
Date Posted: May 19, 2008 at 12:57 AM
I strongly recommend using a 1701G by DEI you would need a cuple of resistors however it would do 80% of the install including the pkIII bypass very simple install using this module .
Posted By: Velocity Motors
Date Posted: May 19, 2008 at 11:03 AM
The Fortin or iDatalink modules are a great modules that will bypass and interface with the OEM system without any additional parts. We use the iDatalink for the 07+ trucks with any problems at all.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: tbone587
Date Posted: May 20, 2008 at 11:08 PM
I finished the install using an xk01 and an xk06. Everything went smooth until I installed the xk06... I ended up wiring it into the wrong wires because the plug looked similar to the picture and the wire colors were the same!! Eventually I figured it out and everything works perfectly now.
|