2000 mitsubishi eclipse, viper 791xv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104846
Printed Date: May 21, 2024 at 6:02 AM

Topic: 2000 mitsubishi eclipse, viper 791xv

Posted By: sworrix222
Subject: 2000 mitsubishi eclipse, viper 791xv
Date Posted: May 19, 2008 at 6:57 PM

does anyone know if i need to bypass anything or need a special module to install a viper 791xv 2way/remotestart..............

Replies:

Posted By: KarTuneMan
Date Posted: May 19, 2008 at 7:36 PM

Manual or auto trans? If it's a manual you need a DEI 689M. An interface for the manual transmission. Without this, it should not be installed.

You would also need a trransponder bypass.

-------------

Posted By: sworrix222
Date Posted: May 19, 2008 at 7:50 PM

automatic....thanks

Posted By: fcss
Date Posted: May 20, 2008 at 2:32 PM

your car has a chip in the key so you need a transponder bypass called a 556u you will have to loose a key hopefully you have more then 1 key cause one of your keys has to go inside the 556u.

Print Page | Close Window