wiring 520t

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104925
Printed Date: July 13, 2025 at 12:26 AM

Topic: wiring 520t

Posted By: rt4x4
Subject: wiring 520t
Date Posted: May 22, 2008 at 4:08 PM

I am gouing to hook up a 520t BUB to my clifford 50.5x and was wanting to know what trigger to hook it up to,I am using my hood and trunk inputs,can you use the blue wire on the shock sensor or would it be better to hook it to the hood or trunk trigger and diode isolate, if so which way would the diodes go?

Replies:

Posted By: JWorm
Date Posted: May 22, 2008 at 6:57 PM

Blue wire in the shock sensor harness will be fine. It will show up as sensor 2 on the remote.

Print Page | Close Window