2002 acura rsx door actuators
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104954
Printed Date: May 02, 2024 at 2:37 AM
Topic: 2002 acura rsx door actuators
Posted By: carguy411
Subject: 2002 acura rsx door actuators
Date Posted: May 23, 2008 at 7:27 PM
i have a guy whose the passenger door lock isnot working, the door switch is openning the other door fine, it was happening intermidently but now doesnt work at all. im thinking it is the actuators, i wanna change both of them can i use any one or is there a certain one i need
thanks
Replies:
Posted By: techman93
Date Posted: May 23, 2008 at 7:58 PM
You could go OEM from a dealer or change them to after market but still use the factory wiring. They should have two wires so if you hook up actuator you have a 50% chance in getting it right the first time, if not reverse the wires.
I might suggest looking into compact door lock actuators to save space if you choose to buy after market ones.
-------------
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya
Posted By: carguy411
Date Posted: May 24, 2008 at 12:36 PM
you think i should tke them out first or order any one and it will work ok is there mods that have to be made?
thanks
Posted By: techman93
Date Posted: May 24, 2008 at 1:05 PM
Most door actuators are designed the same except the compact versions are a tad smaller. They are all made to be universal and come with parts to mount them and connection rod and clamp. If you want to take them out first it may be a waste of time because then you will need to reassemble door and then take them apart again to do the install.
If you want it to be a direct fit part you will need to order Acura door lock motors from a dealer.
-------------
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya
Posted By: xtremeaudio
Date Posted: May 27, 2008 at 5:05 AM
aftermarket door lock will be a lot of work for you to install if you go with oem it much easy for you
|