viper 5002 peugeot 206
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104971
Printed Date: June 11, 2024 at 4:38 AM
Topic: viper 5002 peugeot 206
Posted By: karibdis
Subject: viper 5002 peugeot 206
Date Posted: May 24, 2008 at 1:57 PM
Hi all. Im looking for the complete peugeot 206 wiring diagram. Can anybody help me?. Im the owner of a peugeot 206, 2008,1.6lts, petrol, 5 doors, and im traying to install a viper 5002 alarm.
Thanks in advance.
Replies:
Posted By: howie ll
Date Posted: May 25, 2008 at 10:05 AM
You won't find one, the colours change all the time and the 08 uses the CAN bus system from the 207, having said that it's do-able if you have access to a DMM. It's test and see, I'll give you a clue, the BCI box above the fusebox for indicators door contacts and locks, remove the glove box for access to the engine bay, the bonnet switch wire changes colour at least twice (par for the course) and tap your power at ign switch. Most of these cables go through to the loom behind glove box but the colours change so you are spending ages finding what you need. If this lot confuses you, get an alarm specialist to install it because anyone asking your question doesn't know what they are doing.
|