power window switch problems
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105095
Printed Date: May 12, 2024 at 2:10 AM
Topic: power window switch problems
Posted By: hr220a
Subject: power window switch problems
Date Posted: May 29, 2008 at 11:20 AM
Got a power window problem. 2001 Honda Civic DX 4 door. right front window doesn't work but the other three do. The window motor and the door switch both work. I pulled apart the master switch and it was melted so I replaced it. With the new switch the window still doesn't work. At the master, each switch has 5 wires: 12V, GND, GND, 12V up, 12V down. The window in question doesn't have the 12V (and the upo and down, obviously). Any ideas on what could be going on?
Replies:
Posted By: howie ll
Date Posted: May 29, 2008 at 6:01 PM
If it's driver door you are looking for a one relay, it might be in the switch or separate in the driver's door, follow the motor wires.
Posted By: hr220a
Date Posted: May 30, 2008 at 8:21 AM
the passanger window is the problem, but the passanger switch in the drivers door was the burnt one
Posted By: Mike M2
Date Posted: May 30, 2008 at 2:37 PM
How do you know the motor is good?
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: hr220a
Date Posted: May 30, 2008 at 3:13 PM
put power to it directly and the window moved
Posted By: moonliter
Date Posted: May 30, 2008 at 3:23 PM
hr220a wrote:
At the master, each switch has 5 wires: 12V, GND, GND, 12V up, 12V down. The window in question doesn't have the 12V (and the upo and down, obviously). Any ideas on what could be going on?
First check the 20amp fuse 22 at underdash fuse/relay box, replace if it is blown out.
|