Print Page | Close Window

03 hummer H2

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10520
Printed Date: April 26, 2024 at 12:16 PM


Topic: 03 hummer H2

Posted By: mxxmikexx
Subject: 03 hummer H2
Date Posted: March 06, 2003 at 3:13 PM

is there any other spot to grab the factory alarm disarm wire without going into the drivers door? i know a gmdl4 will take care of everthing, but im just curious. thanks



Replies:

Posted By: auex
Date Posted: March 06, 2003 at 3:19 PM
I don't think so. Everything is data bus and if you don't want to use the module then you would have to tag wires in the doors.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.



Posted By: BNLUIS
Date Posted: March 07, 2003 at 2:00 PM

NO, you will have to go inside door. Like Auex said everything is databus

FCTRY ALRM DISARM|lt. green           |-  |driver door module in door



-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.


Print Page | Close Window