Print Page | Close Window

add radar sensor to a ultrastarter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105205
Printed Date: April 29, 2024 at 12:09 PM


Topic: add radar sensor to a ultrastarter

Posted By: asjeep
Subject: add radar sensor to a ultrastarter
Date Posted: June 02, 2008 at 6:55 PM

Hello I bought an ultrastarter 4265 and a dei 508 microwave sensor.....

Now going to install the ultrastarter and i see the shock sensor is built into the brain.... uggg....

How can i connect teh two up?

i have a spare shock sensor from a crimestopper if that would help

Thanks

Aaron

-------------
2001 jeep wrangler se



Replies:

Posted By: asjeep
Date Posted: June 03, 2008 at 12:44 AM
just had a thought.... can i put it on the trigger for the door switch? this may only allow me to use one zone for the 508.... bright ideas????

-------------
2001 jeep wrangler se




Posted By: asjeep
Date Posted: June 04, 2008 at 11:18 AM
Bump.... anyone? also notice the shock sensor in the thing seems to only be acting as a single stage, ie no warn, just straight to alarm

-------------
2001 jeep wrangler se




Posted By: customak47
Date Posted: June 11, 2008 at 9:14 AM

there should be an auxilary sensor input harness, four pin that came with... doesn't say in install manual?



-------------
My rifle is my friend...




Posted By: asjeep
Date Posted: June 11, 2008 at 2:32 PM
nope not even a port for the aux on the brain... contacted ultrastart they said i needed a different model..... planned obsolescence nice

-------------
2001 jeep wrangler se





Print Page | Close Window