2008 mercury sable, alarm/remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105215
Printed Date: May 16, 2025 at 12:25 AM

Topic: 2008 mercury sable, alarm/remote start

Posted By: big sexy lac
Subject: 2008 mercury sable, alarm/remote start
Date Posted: June 03, 2008 at 7:52 AM

Anybody have the wiring diagram , I'm intalling an alarm remote start with an xko4. Thanx in advance.

-------------
WELL?

Replies:

Posted By: Big Dog
Date Posted: June 03, 2008 at 8:04 AM

See here. 2008 Sable / Taurus / 500

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: big sexy lac
Date Posted: June 03, 2008 at 8:22 AM

thank you big dog, does keysense need to be hooked up?

and do you know if the xk04 will take care of the factory arm and disarm?

-------------
WELL?

Posted By: Big Dog
Date Posted: June 03, 2008 at 8:56 AM

Keysense isn't required. XK04-PKF3 does immobilizer only. Locks and OEM alarm easy to interface in driver's kick.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: big sexy lac
Date Posted: June 03, 2008 at 11:52 AM

Kool,thanks again!

-------------
WELL?

Posted By: big sexy lac
Date Posted: June 04, 2008 at 12:15 AM

Ok 1 more question the disarm wire in the drivers kick is just hook up the the disarm wire from the a/rs rite? But the rearm I have to pulse both wires at the same time so I have to diode isolate them which means the a/rs rearm wire will need the two diodes leading into both of the rearm wires?just wanna be sure! Thanx

-------------
WELL?

Print Page | Close Window