03 rsx, viper 5900, 556u bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105363
Printed Date: May 02, 2025 at 4:47 PM

Topic: 03 rsx, viper 5900, 556u bypass

Posted By: nbboy7
Subject: 03 rsx, viper 5900, 556u bypass
Date Posted: June 09, 2008 at 3:20 PM

Ok i put in viper 5900 and 556u imoblelizer bypass. But it don't send a singnal. I wanted to know the if i hook it up right. I have the red,blue and black wires hooked up. I'm also not so sure on where to mount the ring.

Replies:

Posted By: Mike M2
Date Posted: June 09, 2008 at 8:32 PM

If you don't mount the ring it isn't going to work. The ring goes around the ignition switch just under the shroud. The wiring is simple, red to 12volts, black to ground, and blue to the blue statis wire on your 5900....

-------------
Mike M2
Tech Manager
CS Dealer Services

Print Page | Close Window