Print Page | Close Window

92 ford ranger

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105572
Printed Date: May 16, 2025 at 6:42 PM


Topic: 92 ford ranger

Posted By: chillin420
Subject: 92 ford ranger
Date Posted: June 19, 2008 at 12:43 PM

i recently put an alarm in a 92 ranger and it has returned with the blinkers not working.  i know i tagged all wires correctly, have checked and double checked.  any ideas as to what might be going on or why this is  happening.

-------------
you can do it....
advanced MECP, lol does it really matter....
patience is a virtue



Replies:

Posted By: joch1314
Date Posted: June 19, 2008 at 2:24 PM

Start with the obvious and check your fuses....(i'm sure you did that already)!  Also check the bulbs, i've seen in some vehicles that if one of the bulbs goes out the whole circuit quits working!  if the fuse is blown, and keeps blowing, find out what could possibly be causing that! 



-------------
...half of the truth can be worse than a lie. <----Roger Russell said that..





Print Page | Close Window