5 wire acuators and parking lights
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105574
Printed Date: May 17, 2025 at 8:03 AM
Topic: 5 wire acuators and parking lights
Posted By: kroutonz
Subject: 5 wire acuators and parking lights
Date Posted: June 19, 2008 at 2:23 PM
I have a 1991 240sx and just installed a central locking system. The acuator has 5 wires coming out of it white, black, blue, green, and brown. I'm installing a 350HV alarm and don't know how to tell which wire goes where for the keyless entry. Also with the parking lights it says RED / blue and behind the dash dimmer, but there are 2 RED / blue wires behind the dash dimmer. Should I just cut one and if the parking lights don't work use that one? Any help would be greatly appreciated.
Replies:
Posted By: kroutonz
Date Posted: June 19, 2008 at 5:08 PM
I got the parking lights working and thought i did the door locks right, but when i put the alarm in everything worked except for the door locks :( any ideas?
Posted By: howie ll
Date Posted: June 19, 2008 at 5:12 PM
If the 350 has 6 wires on its lock output, then BROWN / back and WHITE/ black to ground, purple and PURPLE / black to 12V+batt via a 7.5amp fuse, GREEN/ black to green on motor and blue/ black to blue on motor depending on wether it "pulls" down to lock. If it only has blue and green then you will need either a 451 lock module or 2 x relays. As for your lights issue, test both leads with a DMM, if it changes either goes 12v+ or to ground on light activation then wire the white accordingly (see installation instructions for alarm).
|