00 sts memory seats
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105576
Printed Date: May 17, 2025 at 12:41 PM
Topic: 00 sts memory seats
Posted By: nbcadillac
Subject: 00 sts memory seats
Date Posted: June 19, 2008 at 6:16 PM
i just installed a crimestopper cs-2016.dp.fm with a int-sl bypass module hooked up through data link on a 2000 seville sts. the int-sl states that it will work the memory seats through unlock. my question is how does that work because when i enter it always says driver 1. one other issue i see is that the trunk release will only work from the remote if the doors are locked...
Replies:
Posted By: Chris Luongo
Date Posted: June 20, 2008 at 9:44 PM
I haven't used that module before, but I've used others.
They should be more clear in the instructions. All aftermarket remotes will always be Driver 1. When Driver 2 enters the car, they'll have to push the 2 button on the door panel to get their settings back.
As far as the trunk, I don't know.
But maybe you could put a tester on the wire going into the module, and make sure that the Crimestopper is really triggering the module when the doors are unlocked.
|